Rain Test Chamber Toron-IPX 123456
Rain Test Chamber Toron-IPX 123456 is designed to evaluate products for IPX1 through IPX6 waterproof standards. Its exterior is crafted from high-quality domestic steel with a sleek, painted finish for enhanced durability and aesthetics.
Ideal for testing outdoor lighting, household appliances, automotive components, and various electronic and electrical products.
Standard Test
The Rain Comprehensive Waterproof Test Chamber IPX123456 adheres to the following standards:
- IEC60529:1989 + A1:1999 + A2:2013: Degrees of Protection Provided by Enclosures (IP Code)
- GB4208-2017: Enclosure Protection Level (IP Code), covering Clauses 14.2.1, 14.2.2, and Figure 3; Clauses 14.2.3 and 14.2.4, Figure 4; and Clauses 14.2.5 and 14.2.6, Figure 6
- GB7000.1: Lamps Part — General Requirements and Tests, including Clauses 9.2.3 through 9.2.7, Figure 9.4, and Clause 9.5
This test chamber ensures compliance with rigorous waterproof and protection requirements for various applications.
Structural Features
Inner and Outer Chamber Materials
The inner chamber is constructed with 1.2mm thick SUS#304 stainless steel and features a fully welded structure, ensuring excellent sealing and resistance to cracks.
The exterior is made from 1.5mm thick cold-rolled steel that undergoes brushing, polishing, and painting treatments, providing superior scratch resistance.
Insulation and Sealing
The chamber is insulated with 100mm thick polyurethane foam. The door seal uses double silicone rubber for a secure and durable fit.
Observation Window
The observation window consists of four layers of tempered glass, available in customizable sizes. To prevent frost during low-temperature operation, built-in heating wires ensure effective defrosting.
Electrical System
The circuit cabinet features a clean and professional layout, adhering to UK standards. It includes comprehensive circuit diagrams for easy reference. Each line is uniquely coded, clearly labeled, and easy to identify, simplifying troubleshooting and maintenance.
| Chamber Specifications | Inner chamber size | W1700 × D1700 × H2000mm |
| Outer chamber size | W2090 × D4220 × H2650mm | |
| Turntable diameter | Ø600mm | |
| Maximum load of rotary table | 50kg | |
| Lifting height of rotary table | 1000-1600mm (table top distance from bottom) | |
| Rotary table tiltable | 0° or 15° (horizontal) | |
| Turntable speed | 1-5r/min (precisely adjustable) | |
| Rotary table rotation mode | Always forward / alternating forward and reverse / intermittent rotation | |
| Flow rate adjustment | Manual adjustment of the flow rate by means of aflowmeterwith adjustment panel | |
| Testing time | 0-999 min | |
| Total weight | 500kg | |
| IPX12 Parameters | Drip Rain Panel Area | 1200×1200mm |
| IPX12 spray hole size | Diameter 0.4mm | |
| Distance between drip holes | 20×20mm | |
| Rainfall | 1mm/min (IPX1); 3mm/min (IPX2) | |
| Raindrop plate lifting mode | Non-liftable (Fixed) | |
| IPX34 Parameters | Oscillating tube radius dimensions | R800mm |
| R800 Flow rate | 2.3L/min ±5% (IPX3); 3.5L/min ±5% (IPX4) | |
| Water jet aperture size | 0.4mm | |
| Water jet aperture spacing | 50mm | |
| Pendulum tube inner diameter | 15mm | |
| Pendulum Angle | 120° (IPX3), 350° (IPX4) or customized setting | |
| Pendulum swing speed | 240° round trip 4S, 720° round trip 12S (precision control) or customized | |
| IPX56 Parameters | IPX5 water jet aperture | 6.3mm |
| IPX6 water spray aperture | 12.5mm | |
| IPX5 water spray flow rate | 12.5L/min ±5% | |
| IPX6 water spraying flow rate | 100L/min ±5% | |
| Spray gun fixing method | Mechanical fixing (swing, fixed-point water spray) | |
| Extra accessories | 1. a copy of the operating instructions; 2. a copy of the factory certificate; 3. acopyoftheequipment warranty card; 4. 1 filter cartridge; 5. 200 test needles; 6. 6 meters of waterpipe(1) | |
| Use conditions | The user guarantees the following conditions and completes the correspondingconnection | |
| Site Requirements | The ground is flat, the drainage is smooth, the floor and wall are waterproofed, andafloordrain or drainage ditch is installed. Ground load capacity is not less than 200kg / ㎡ Venue is well ventilated No strong vibration around the equipment No strong electromagnetic fields around the equipment No flammable, explosive, corrosive substances and dust around the equipment Appropriate use and maintenance space is left around the equipment: Back, left, right, top of the device: 800mm; front of the device: 1400mm |
|
| Ambient conditions |
Temperature: 5 ℃ ～ 35 ℃
Relative humidity: ≤85% Air pressure: 86kPa ～ 106kPa |
|
| Power Requirements | Voltage, frequency | AC380V±10%; 50Hz±10%; Three phase |
| Power | 3kW | |
| Protective ground resistance | <4Ω | |
| Power switch requirements |
1. The user is required to configure the equipment with a leakage protection air switchofthe corresponding capacity at the installation site, and this switch must be independent forthis equipment 2.It is prohibited to use the knife switch or power socket 3.The location of the leakage protection air switch not more than 2 meters fromthedevice |
|
| Water source requirements |
1. The user is required to configure a water source for the equipment at the installationsite,the water pressure is not lower than 0.2Mpa, and install a 4-point tap. 2. The faucet is not more than 2 meters from the equipment |
|
