Soil Mill DP50
Feed size:<2mm
Final fineness:<75 µm (95%)
Speed:800 rpm
The Soil Mill DP50 is a precision grinding tool. Unlike other vertical disc mills on the market, its discs are arranged horizontally, allowing for rapid size reduction to under 75 microns for moderately hard and brittle samples. The reduction process occurs between a stationary mill disc and a moving mill disc. Its ease of use, efficient milling, and minimal residue in the mill chamber make the DP50 an excellent option for conducting large-scale environmental soil tests.
Soil, building materials, nuclear ore, cement, concrete, cinder, coke, glass, porcelain, minerals, refractory clay, granite, and monohydrallite, among others.
Working Principle
The comminution effects occur due to the pressure and friction forces created when a moving disc rotates against a fixed disc located just below it. The sample enters the mill chamber from the center of the discs, where it undergoes initial crushing. Subsequently, it is propelled to the outer regions of the mill discs by centrifugal force for further grinding. After the milling process, the reduced particles drop into a collecting pan located around the outer edges of the milling discs, ensuring that the milling discs remain clean and the sample is collected efficiently.
How Can We Help You?
Contact our sales team for a quotation.
|
Feed size |
<2mm
|
|
Final fineness |
<75 µm (95%)
|
|
Speed |
800 rpm
|
|
Collecting pan volume |
2L |
|
Grinding gap width adjust range |
0-25mm
|
|
Grinding sets material |
Zirconium oxide, Aluminium oxide and Agate |
|
Rated power |
550W
|
|
Power supply |
220V,50/60Hz
(110V Also available upon request) |
